Skip to main content

FRAME Microscope System

Comprehensive Operational Manual

Fast Rigid Automated Microscope Engine


Version 1.0
June 2025
English Edition


openUC2 GmbH
Jena, Germany


Document Information

FieldInformation
Product NameFRAME Microscope System
ModelMotorized Version
Document TypeComprehensive Operational Manual
Document Version1.0
Publication DateJune 2025
LanguageEnglish
ComplianceCE Marking according to EU Directives
Target AudienceResearch professionals, laboratory technicians, students

CE Declaration of Conformity

This product complies with the following European Directives and Standards:

  • Directive 2014/30/EU (Electromagnetic Compatibility)
  • Directive 2014/35/EU (Low Voltage)
  • Directive 2011/65/EU (RoHS)
  • IEC 61010-1 (Safety requirements for electrical equipment)
  • EN 55011 (Electromagnetic compatibility)

The CE marking indicates conformity with applicable regulations.


Important Safety Notice

:::error ⚠️ WARNING

Knowledge of this manual is required for safe operation of the instrument. Please read all safety information before operating the system.

  • Follow all safety procedures outlined in Section 1
  • Use appropriate personal protective equipment
  • Ensure proper training before operation
  • Contact technical support if uncertain about any procedure :::

© 2025 openUC2 GmbH. All rights reserved.

This manual is provided for the operation of the FRAME Microscope system. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of openUC2 GmbH, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law.

Trademarks: All company and product names mentioned in this manual may be trademarks or registered trademarks of their respective companies.

Disclaimer: While every effort has been made to ensure the accuracy of this manual, openUC2 GmbH assumes no responsibility for errors or omissions. Specifications are subject to change without notice.


Contact Information

openUC2 GmbH
Hans-Knöll-Str. 6 07745 Jena, Germany

Technical Support: hello@openuc2.com (openuc2.discourse.group) Sales Information: sales@openuc2.com
General Information: hello@openuc2.com
Wiki: https://openuc2.github.io Website: https://openuc2.com

Phone: +49 (0) -

Manual Structure Overview

This comprehensive operational manual is organized into seven main sections:

  1. Safety and Compliance - Essential safety information and regulatory compliance
  2. Introduction and Overview - System description and applications
  3. Technical Specifications - Detailed system specifications and requirements
  4. Installation and Setup - Complete installation and configuration procedures
  5. Operation Manual - Comprehensive operating instructions
  6. Maintenance and Troubleshooting - Care, maintenance, and problem resolution
  7. Appendix - Reference information and additional resources

Quick Start Guide

For immediate operation after installation:

  1. Safety First: Read Section 1 completely before proceeding
  2. System Check: Verify installation according to Section 4
  3. Basic Operation: Follow startup procedures in Section 5
  4. Emergency: Keep emergency contact information readily available

New Users: Complete training is strongly recommended before independent operation.


Document Prepared by: openUC2 Technical Documentation Team
Date: June 2025
Manual ID: FRAME-OM-EN-v1.0