Sample Holder
This page describes how to assemble the kinematic XY mount for moving a laser/ pinhole.
Duration: 1
Bill of material
Below you will find all components necessary to build this device.
3D printing files
All these files need to be printed.
Printing parameters:
| Infill | Layerheight | Special Profile | Material |
|---|---|---|---|
| ~20% | 0.25/0.3mm | mini/i3 | PLA (black) |
| ID | Amount | Type | Details | Link |
|---|---|---|---|---|
| #01-01 | 1 | Base | Holds Mirror | Part.stl |
| #01-01 | 2 | Base | Spring Locks | Part.stl |
Additional parts
This is used in the current version of the setup
| ID | Amount | Type | Details | Price | Link |
|---|---|---|---|---|---|
| #01-01 | 1 | Spring | 0,20€ | NONE | |
| #01-01 | 1 | Threaded Inserts M3 | 0,20€ | NONE | |
| #01-01 | 1 | Screw Ball head | 0,20€ | NONE |
Assembly
Duration: 1
Below we describe how the device can be build and assembled in order to replicate the whole system.
STEP 1
All parts you need to assemble the module:
STEP 2
:::alert
this has been updated with magnets! Make sure you label the magnets with prior to insertion so that polarity is correct.
:::
Design files
The original design files are in the INVENTOR folder.