Eyepiece
Duration: 1
This page describes how to assemble the Eyepiece module. It uses a standard eyepiece with 22mm diameter.
Bill of material
Below you will find all components necessary to build this device
3D printing files
All these files need to be printed.
Printing parameters:
| Infill | Layerheight | Special Profile | Material |
|---|---|---|---|
| ~20% | 0.25/0.3mm | mini/i3 | PLA (black) |
| Type | Details | Link |
|---|---|---|
| Holder | holds Eyepiece | Part.stl |
Additional parts
This is used in the current version of the setup
| Type | Details | Price | Link |
|---|---|---|---|
| Eyepiece | 10x, 18mm Eyepiece | 10 € | Aliexpress |
Assembly
Duration: 1
Below we describe how the device can be build and assembled in order to replicate the whole system.
STEP 1
All parts you need to assemble the module:
Remove XX
STEP 2
Use Hotglue to permanently mount the eyepiece to the insert.
STEP 3
Add the insert to the cube, close it and store it safely.
Design files
The original design files are in the INVENTOR folder.