KINEMATIC MIRROR (90°)
This page describes how to assemble the partially transparent mirror (45°) module. It uses a Frontsurface 50% mirror that.
Duration: 1
Bill of material
Below you will find all components necessary to build this device
3D printing files
All these files need to be printed.
Printing parameters:
| Infill | Layerheight | Special Profile | Material |
|---|---|---|---|
| ~20% | 0.25/0.3mm | mini/i3 | PLA (black) |
| ID | Amount | Type | Details | Link |
|---|---|---|---|---|
| #01-01 | 1 | Base | Holds Mirror | Part.stl |
Additional parts
This is used in the current version of the setup
| ID | Amount | Type | Details | Price | Link |
|---|---|---|---|---|---|
| #01-01 | 1 | 50% Mirror | Astromedia 40x30mm PArtially Transparent Mirror | 8,00€ | Astromedia |
Assembly
Duration: 1
Below we describe how the device can be build and assembled in order to replicate the whole system.
STEP 1
All parts you need to assemble the module:
STEP 2
caution
Insert the beam splitter in such a way that the mirroring/coated surface points away from the printed part!
Design files
The original design files are in the INVENTOR folder.