LENS
Duration: 1
This page describes how to assemble the LEns module. It uses a 40mm biconvex/biconcave glasslens with varyin diameter
Bill of material
Below you will find all components necessary to build this device
3D printing files
All these files need to be printed.
Printing parameters:
| Infill | Layerheight | Special Profile | Material |
|---|---|---|---|
| ~20% | 0.25/0.3mm | mini/i3 | PLA (black) |
| ID | Type | Details | Link |
|---|---|---|---|
| #01-01 | Holder | holds Lens | Part.stl |
| #01-02 | Lid | fixes lens using screw mechanism | Part.stl |
Additional parts
This is used in the current version of the setup
| ID | Type | Details | Price | Link |
|---|---|---|---|---|
| #01-03 | Lens (50mm) | f'=50mm, Diameter 40mm | 2 € | Aliexpress |
| or | ||||
| #01-04 | Lens (100mm) | f'=100mm, Diameter 40mm | 2 € | Aliexpress |
| or | ||||
| #01-05 | Lens (-50mm) | f'=-50mm, Diameter 40mm | 2 € | Aliexpress |
Assembly
Duration: 1
Below we describe how the device can be build and assembled in order to replicate the whole system.
STEP 1
All parts you need to assemble the module:
STEP 2
Thread in the round piece tand fix the lens. Make sure you use the right ring for the right lens!
caution
Clean the lenses with a cotton cloth.
Design files
The original design files are in the INVENTOR folder.