KINEMATIC MIRROR (45°)
This page describes how to assemble the kinematic mirror (45°) module. It uses a Frontsurface mirror that can be tuned in 3 axis
Duration: 1
Bill of material
Below you will find all components necessary to build this device
3D printing files
All these files need to be printed.
Printing parameters:
| Infill | Layerheight | Special Profile | Material |
|---|---|---|---|
| ~20% | 0.25/0.3mm | mini/i3 | PLA (black) |
| ID | Amount | Type | Details | Link |
|---|---|---|---|---|
| #01-01 | 1 | Base | Holds screws | Part.stl |
| #01-02 | 1 | Mirror Mount | holds mirror and is movable | Part.stl |
Additional parts
This is used in the current version of the setup
| ID | Amount | Type | Details | Price | Link |
|---|---|---|---|---|---|
| #01-01 | 1 | FS Mirror | Astromedia 40x30mm Frontsurface Mirror | 5,00€ | Astromedia |
| #01-02 | 4 | Screw (orings) | M3x12, DIN912 | 5,00€ | Astromedia |
| #01-03 | 3 | Screw (Pushing) | M3x20, NOT DECIDED! | 15,00€ | Link |
| #01-04 | 2 | O-Ring | r=8mm | 0,10€ | Link |
| #01-05 | 1 | Cube | 5,00€ | Link |
Assembly
Duration: 1
Below we describe how the device can be build and assembled in order to replicate the whole system.
STEP 1
All parts you need to assemble the module:
STEP 2
STEP 3
STEP 4
Design files
The original design files are in the INVENTOR folder.